Get complete information related to latest Luminous Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Luminous Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Luminous Item Tenders.
Tender For bid to ras tender for supply of deutz 30kva dg set spares - spin on oil filter 30 kva dg set model tcd , filter insert , valve piston , valve spring , venting line , spring band clip , rubber sleeve , intake nozzle , spring band clip , pipe clip , gasket , hexagon head screw , washer , exchange filter , lubricating oil line , o ring tc duetz , oil return line , clamping claw , torx screw , clip , flow control valve , injector valve , pressure sensor , sensor cable , fuel pump lp , repair kit cr 1600 , leak fuel pipe , hose line , fuel pipe tank to ws , fuel pipe return to tank , fuel pipe ws to fsp , spring band clip , hose , sping band clip , spring band clip , dust dischage valve , holder , service switch , cap , pressure sensor , hexagon head screw , locking screw , sealing ring , water pump , connection piece coolant pump , snap ring , hexagon head screw , thermostat housing , temperature sensor , spring band clip , elbow , hose , gasket , gasket , hose , rubber sleeve , sealing disc , compensator , hexagon head screw , sealing ring for injector , gasket , v belt pulley , deflection pulley , v ribbed belt , speed sensor , gear ring , piston ring set , cylinder head seal , gasket , screw , filler lock , gasket set
Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin
Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther
Tender For providing of repair and overhauling service - ductable air conditioner; combined altitude, temp and humidity test chamber mauli; yes; buyer premises,repair and overhauling service - ductable air conditioner; environmental stress screening chamber trimurti; yes; buyer premises,repair and overhauling service - ductable air conditioner; diurnal test chamber bhaskar; yes; buyer premises,repair and overhauling service - ductable air conditioner; 8000 l environmental test chamber arjun; yes; buyer premises,repair and overhauling service - ductable air conditioner; temperature control chamber sangam; yes; buyer premises,repair and overhauling service - ductable air conditioner; walk-in-type climatic test chamber bhishma; yes; buyer premises,repair and overhauling service - ductable air conditioner; walk-in-tyupe tropical test chamber kaveri; yes; buyer premises,repair and overhauling service - ductable air conditioner; table top climatic test chamber vijay; yes; buyer premises,repair and overhauling service - ductable air condit
Tender For supply of instrument spare and annual maintenance contract - circular charts:- i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :- i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :- i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:- i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:- i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:- i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:- a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :- (i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :- i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :- (i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amc super-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit
Tender For repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.